BipodeXt The Queen’s Equalizer Kit for BipodeXt G3

Description

The Queens Equalizer Kit mounts on our MSRs, PRSs, and ELR Max models. These models have three 10-32 tapped holes in their Front Plugs. Older Front Plugs have only two tapped holes or not holes at all. Mounting the Queens Kit to older BipodeXt models is possible if their Front Plugs are upgraded.

This kit comprises the Queens bracket, a Picatinny rail, related screws, and a Hex wrench. One end of the bracket is mounted to the BipodeXts Front Mount. The Picatinny rail is mounted to the other side of the bracket. The rail can be mounted either inside or atop the bracket. Mounting inside the bracket will lower the rifles center of gravity by .200in/5 mm than its original (before BipodeXt) height. Mounting atop the bracket will lower the rifle by 1.080in/27.4 mm. Either mounting method, inside or atop, yields a net gain. As a rule, the lower the rifles center of gravity, the easier it is to manage and even mitigate, recoil. If you mount the rail atop the bracket, ensure there is sufficient clearance between the rail and the barrel! Remember that many barrels whip during the firing sequence.

WARNING: California`s Proposition 65

Specifications for BipodeXt The Queen’s Equalizer Kit for BipodeXt G3:

Package Contents:

• BipodeXt The Queen’s Equalizer Kit for BipodeXt G3
• Queens Bracket
• 17 Slot Picatinny Rail
• 10-32 x 3/4in Flat Head Screws (x6)
• 1/8 Hex Wrench (Long Arm)